Fire Alarms

Intelligent Optical Smoke Detector

With our vast industry experience and competent workforce, we are engaged in offering supreme quality Intelligent Optical Smoke Detector. Offered smoke detector is comprised of pulsing LED located at the chamber within the housing of the detector. The offered smoke detector is developed by superior grade material and leading technology in adherence with the norms of industry. The indicator LED which is clear in quiescent state produces red light when detector changes to alarm state.

Features:

  • Dual ionization smoke sensing chambers
  • Mounted on bracket which needs no wiring
  • UL approved


Optical Heat Detector

We feel proud to introduce our copious clients with an innovative collection of Optical Heat Detector that has only one thermistor and changes to the alarm state at a preset temperature. This heat detector is designed by utilizing the best quality material and sophisticated technology.  Offered heat detector is operate by using a matched pair of thermistors to sense heat. The offered heat detector is distinguishable from the smoke detectors by having wide openings to the surrounding atmosphere to allow good movement of air around the external thermistor.

Features:

  • In-built sensors
  • High efficiency
  • Easy installation

Other Details:

  • The A1R, BR and CR (rate-of-rise) heat detectors operate by using a matched pair of thermistors to sense heat.
  • One thermistor is exposed to the ambient temperature, the other is sealed.
  • In normal conditions the two thermistors register similar temperatures, but, on the development of a fire, the temperature recorded by the exposed thermistor will increase rapidly, resulting in an imbalance, causing the detector to change into the alarm state.
  • Rate-of-rise detectors are designed to detect a fire as the temperature increases, but they also have a fixed upper limit at which the detector will go into alarm if the rate of temperature increase has been too slow to trigger the detector earlier.
  • The CS (static response) heat detector has only one thermistor and changes to the alarm state at a preset temperature. Externally, the heat detectors are distinguishable from the smoke detectors by having wide openings to the surrounding atmosphere to allow good movement of air around the external thermistor

Smoke Cum Heat Detector

Intelligent Reflective Beam Detector

Intelligent Reflective Beam Detector works on the principle of reflective infrared beam smoke detector that can be directly connected to a fire alarm loop. Transmitting status information via the loop between the detector and controller. The detector must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. Built-in intelligent microprocessor, the detector has strong ability of analysis and judgment. The detector automatically carries out system adjustment, compensation and variation of ambient data. Secure and speedy communication through the on board processor enables the detector to make its own decision, resulting in greater automation.

Features:

  • Quick and easy to set up, visual strength indication.
  • Built-in microprocessor Conventional System compatible
  • Quick and easy to set up, visual strength indication.

 

Intelligent Sounder Beacon

We are engaged in offering a wide assortment of Intelligent Sounder Beacon. These products offered by us are regarded as all purpose sounder beacon for fire, security, schools and industrial area. The Intelligent Sounder Beacon are specially designed in order to meet the requirements of varied customers. Moreover, our offered products are widely utilized as a red plexiglass cover and a number of strong signal red LED for longer life and low power consumption.


Features:

  • Straightforward DIL switch addressing
  • Excellent lateral sound distribution
  • Three Evacuate tones (continuous, warble or sweep) and one Alert tone
  • A group addressing facility

Fire Alarm Panel

Our range of Fire Alarm Panel comes in both conventional and addressable panel’s types. Conventional devices can now be easily converted to addressable simply by connecting a small module to each device.

Features
:
  • IRIS Sleek
  • 2 to 8 zone microprocessor based fire alarm panel
  • 16 x 2 character LCD display
  • Inbuilt battery box & battery charger facility
  • Repeater & mimic panel connectivity facility
  • Sleek & lightweight
  • Easily installation
  • easy operation
  • easy maintenance
  • Extra potential free contacts for fire & fault
  • Modular design Integrated solid state circuits
  • 1-4 Zone In one housing
  • Battery charger & Battery box facility
  • Zone wise free & fault indication on LED
  • Compatible with any make detector
  • Extra potential free contact for fire & fault
  • Easy installation
  • Easy operation
  • Easy maintenance
  • Repeater & Mimic panel connectivity
  • Sleek size & light weight

Gas Release Switch

Main features suitable for n.O or n.C fire or access system meet the requirements of bs5839 part. The casing moulded from engineered plastic with high impact strength, high resistance to heat. With good electrical properties all metal is of brass and phosphor bronze ensuring life long resistance against corrosion technical specification current ratings 12/24 vdc 10a net weight 160 gms colours available red, green, white, yelllow, bluetransparent cover optional connections terminal-max 2.5mm 2 cable.

Features:
  • Rugged construction
  • Enhanced durability
  • Dimensional accuracy
  •  

Voice Alarm Zone Control Module

Voice Alarm Zone Control Module offered come developed using latest technology support and is available with GSM frequency of 900/1800/1900Mhz as well as with support of backup battery that allows for continuous working support even in event of power cut/off. Some of its features include battery support of Ni-Hi AAA*6 DC7.4V; LED display indicator; input voltage of DC12V; standby current of <55mA; alarm current of <450 mA; wireless frequency of 433Mhz; comes with working wireless distance of 100m in open area among others.

Features:
  • Voice Alarm system switch module 
  • Switch between normal broadcast and emergency voice amplifier line.
  • CE certified product 
  •  

Intelligent Fire Alarm Controller

Gas Sensor

Being one of the illustrious names in the industry, we bring forth Gas Sensor for our precious customers. These sensors are extensively utilized for determining the presence and concentration of alcohol in one’s breath and are highly regarded for their accurate results. With their fast response time, these sensors enable quick detection process. Customers are reasonably charged for these alcohol gas sensors.


Specifications:

 

  • 5V DC or 5V AC

  • Operation Temperature: -10 to 70 degrees C

  • Dimensions 16.8mm diameter

  • Heater consumption: less than 750mW

  • Requires heater voltage

  • 9.3 mm height without the pins

LCD Repeater Panel

We qre one of the successful names known for offering a world-class range of LCD Repeater Panel that are widely demanded by our clients

  • Aesthetically pleasing design with large LCD display

  • Compatible with all GST intelligent fire alarm panels

  • Back Lit LCD displays all fire information

  • Local sounder mute and scroll alarms buttons

  • Two part plug-in construction with base mo

  • unted termination allows easy installation and connection

  • Repeater can be plugged in to base at time of commissioning

     

  • Technical Specifications


    Operating voltage: 16VDC, 28VDC
    Standby power: 2W
    Maximum power: 5W
    Operating environment:
    Temperature: -10C to + 50C
    Relative humidity: 95%
    Dimensions: 234mm x 104mm x 35mm

 

Fire Extinguishers

Fire Extinguishers offered comprise ABC powder fire extinguishers that can be made available in different capacity options like 3kg, 4KG, 6KG and others as demanded by customers. Further, these come in carbon steel cylinder material finish as well as in OEM construction material options. Some of its features include made using ABC dry powder, suitable for extinguishing of inflammable liquids, solid material, combustible gases and others; available in filling types of foam, water, powder, co2; comes in filling capacity of 1 to 35kg.

Features:
  • Easy to fit
  • High strength
  • Excellent finish
  •  

Addressable Fire Alarm Control Panel

We are the leading trader and supplier of Addressable Fire Alarm Control Panel.The MS-4 is compatible with the new I3 smoke detectors from System Sensor, and provide such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using manufacturer protocol for System Sensor, Wheelock and Gentex appliances. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.

Additional Information:
  • Item Code: GST

Addressable Zone Monitor Unit Fire Alarms

The new control panels are modular with a standard configuration and the possibility to expand peripherals and functions. All the models are fitted inside the same structure consisting of a white cover with the cpu board and a display, a metal base housing the control board and the backplane module which allow the control panels modularity from min 1 loop to max 16 loops. The new Addressable Zone Monitor Unit Fire Alarms is different from the previous ones due to its software and hardware innovations which optimize the data transmission and allow a better programming flexibility to support the different installation needs.

Specifications:

  • En54 part 2 (control and signaling unit)
  • En54 part 4 (power supply equipment)
  • Elkron is glad to present new fire digital line: fap500
  • Usage: Fire
  • Working voltage: DC12~24V

Manual Call Point Fire Alarm System

Suitable for NO or NC fire or access system. Meet the requirements of BS5839 Part.The casing molded from engineered Plastic. With high impact strength, high resistance to heat.With good electrical properties. All metal is of brass and phosphor bronze ensuring life. Long resistance against corrosion.

Features:
  • Easy and accurate clamping
  • Durable
  • High quality

Addressable Zone Monitor Unit Fire Alarms

The new control panels are modular with a standard configuration and the possibility to expand peripherals and functions. All the models are fitted inside the same structure consisting of a white cover with the cpu board and a display, a metal base housing the control board and the backplane module which allow the control panels modularity from min 1 loop to max 16 loops. The new Addressable Zone Monitor Unit Fire Alarms is different from the previous ones due to its software and hardware innovations which optimize the data transmission and allow a better programming flexibility to support the different installation needs.

Specifications:

  • En54 part 2 (control and signaling unit)
  • En54 part 4 (power supply equipment)
  • Elkron is glad to present new fire digital line: fap500
  • Usage: Fire
  • Working voltage: DC12~24V
Looking for Fire Alarms ?
© ABC Systems
 
Desktop Site Back to top